Skip to main content

E-coppo | E-tegola

Industrie Cotto Possagno combines the functionality of terracotta bent tiles and roof tiles with modern photovoltaic technology, maintaining the architectual appearance practically unaltered.


E-coppo Rosso

E-coppo Antica Possagno

E-coppo Vecchio Chiaro

E-coppo Montagna


E-tegola Rossa

E-tegola Serenissima

E-Tegola Ardesia


• the typical thermal flywheel properties of earthenware, and those of the waterproofing system, remain unchanged;

• fixing rods and/or tanks are not required for laying; this avoids all problems caused by infiltration and thermal bridges;

• the installed by-pass diode prevents any problems caused by moving or unexpected shade (trees,  chimneys, aerials, leaves etc.);

• the ventilation channel between the PV module and the bent tile makes the system less sensitive to high summer temperatures (lower temperatures imply greater yield);

• in the case of a power drop due to an irregular module, the module automatically disconnects to prevent the need for replacement. If you wish to replace it, however, the snap-on multi-contact fixtures make the operation quick and easy without the need for specialist technicians;

• finally, the system offers the advantage of to be installed on an existing roof, replacing only the
square metres required without incurring additional costs for perimeter waterproofing.


Our monthly newsletter with a selection of the best posts

Having read and understood the privacy policy available here I request the sending of your newsletter

P. +39 0423 920 777
F. +39 0423 920 707

INDUSTRIE COTTO POSSAGNO S.p.A. - Cod. Fiscale, P. IVA e Reg. Imp. TV n. 03321030268 - R.E.A. TV n. 262004 - Cap. Soc. € 25.500.000,00 i.v. - SDI: M5UXCR1