Bent Tiles Clay Tiles
 winter line
 antique tradition line
 plus line
 natural tradition line
Coppo Antica Possagno Scuro
Antique Tradition Line
Coppo Antica Possagno Scuro
cod. PRD2
Coppo Antica Possagno Scuro
Length~450 mm
Width~185-145 mm
Weight~2,2 kg
NoteAll bent tiles of the Antique Tradition Line are available in the drilled version only.
ExtraMeasures and paces of products may be subject to little variations due to dimensional tolerances according to UNI EN 1304 norm
Coppo d'Autore
Antique Tradition Line
Coppo d'Autore
cod. RDD2
Coppo d'Autore
Length~450 mm
Width~185-145 mm
Weight~2,2 kg
Pieces m2~15 (upper bent tiles)
NoteAll bent tiles of the Antique Tradition Line are available in the drilled version only.
ExtraMeasures and paces of products may be subject to little variations due to dimensional tolerances according to UNI EN 1304 norm
Coppo Vecchio Chiaro
Antique Tradition Line
Coppo Vecchio Chiaro
cod. VCD2
Coppo Vecchio Chiaro
Length~450 mm
Width~185-145 mm
Weight~2,2 kg
Pieces m2~15 (upper bent tiles)
Longitudinal Pitchfrom ~350 to ~365 mm
NoteAll bent tiles of the Antique Tradition Line are available in the drilled version only.
ExtraMeasures and paces of products may be subject to little variations due to dimensional tolerances according to UNI EN 1304 norm
Coppo Vecchio Scuro
Antique Tradition Line
Coppo Vecchio Scuro
cod. VSD2
Coppo Vecchio Scuro
Length~450 mm
Width~185-145 mm
Weight~2,2 kg
Pieces m2~15 (upper bent tiles)
Longitudinal Pitchfrom ~350 to ~365 mm
NoteAll bent tiles of the Antique Tradition Line are available in the drilled version only.
ExtraMeasures and paces of products may be subject to little variations due to dimensional tolerances according to UNI EN 1304 norm
Coppo Veneto Antico
Antique Tradition Line
Coppo Veneto Antico
cod. VAD2
Coppo Veneto Antico
Length~450 mm
Width~185-145 mm
Weight~2,2 kg
Pieces m2~15 (upper bent tiles)
Longitudinal Pitchfrom ~350 to ~365 mm
NoteAll bent tiles of the Antique Tradition Line are available in the drilled version only.
ExtraMeasures and paces of products may be subject to little variations due to dimensional tolerances according to UNI EN 1304 norm

top